Great model, good balance, thanks for keeping it stock and normal. Rear rims might be 1" or so too large in diameter, but only a super keen eye would notice.
Gotta work on the handling, I own this car and it needs much more torque in game. It's a 3,600lb car with 350/332 stock. It also never flips over doing 100+ :P
Good first convert - but the overall finish of the front end needs work, the other thing that sticks out is the front and rear ride height. OE suspension in these cars is at least 2inches of gap to the fender.
Any chance you can make an OE model? The suspension is far from stock on this.
@HookerHeels Agreed.
Wish it had the OE rims, they're the wrong size. ML63's came with two types of rims. These rims are from the later generations.
Great model, good balance, thanks for keeping it stock and normal. Rear rims might be 1" or so too large in diameter, but only a super keen eye would notice.
Please fix the exhaust, it's incorrect. Should only have dual's on the driver side.
Wish it wasn't dumped on the frame and had some ride height closer to stock.
Gotta work on the handling, I own this car and it needs much more torque in game. It's a 3,600lb car with 350/332 stock. It also never flips over doing 100+ :P
Good first convert - but the overall finish of the front end needs work, the other thing that sticks out is the front and rear ride height. OE suspension in these cars is at least 2inches of gap to the fender.
Was going to download - until I noticed the exhaust travesty... Boo!
Just make a clean OE car.