Airbus A330-200P2F [Add-On | Liveries]
![ATL-98 Carvair [Add-On | Tuning I Liveries]](https://img.gta5-mods.com/q75-w500-h333-cfill/images/atl-98-carvair-add-on-tuning-i-liveries/b350fe-unknown.k.png "ATL-98 Carvair [Add-On | Tuning I Liveries]")
![Dornier 228 [Add-On I Liveries]](https://img.gta5-mods.com/q75-w500-h333-cfill/images/dornier-228-add-on-i-liveries/ac9707-unknownrty.png "Dornier 228 [Add-On I Liveries]")
![Fokker 100 [Add-On | Liveries]](https://img.gta5-mods.com/q75-w500-h333-cfill/images/fokker-100-add-on-liveries/b8966e-unknown1a.png "Fokker 100 [Add-On | Liveries]")
![de Havilland Canada DHC-6-300 Twin Otter Seaplane [Add-on I Liveries]](https://img.gta5-mods.com/q75-w500-h333-cfill/images/de-havilland-canada-dhc-6-300-twin-otter-seaplane-add-on-i-liveries/1e5178-unknownq.png "de Havilland Canada DHC-6-300 Twin Otter Seaplane [Add-on I Liveries]")
![Fokker 50 [Add-On | Tuning I Liveries]](https://img.gta5-mods.com/q75-w500-h333-cfill/images/fokker-50-add-on-tuning-i-liveries/bef7ff-Untitledjgdwa.png "Fokker 50 [Add-On | Tuning I Liveries]")
7.301
45
7.301
45
Hey guys here i am with a little side project ive been working on, the A330-200P2F
At the February 2012 Singapore Airshow, the A330P2F freighter conversion programme was launched, engineered by ST Aerospace, supported by Airbus, and industrialised and marketed by their Dresden-based Elbe Flugzeugwerke joint venture. Targeting a 2016 introduction, Airbus then estimated a market requirement for 2,700 freighters over 20 years, half of these mid-sized, including 900 conversions.
The A330-300P2F, adapted for express delivery and e-commerce lower densities, can carry up to 62 t (137,000 lb) over 3,650 nmi (6,760 km). Following flight tests in October 2017 and EASA Supplemental Type Certificate awarded in November, the first was delivered to DHL on 1 December.The A330-200P2F can carry 61 t (134,000 lb) over 4,250 nmi (7,870 km). Following June Flight tests and the STC in July, the first was delivered to EgyptAir Cargo on 3 August 2018.
This model is an adjusted version of the Airbus A330-200 mod from CanalEmbraer
I editted a cargo door on the model and putted an cargo interior in it, i also made some minor changes to the rest off the plane. This model features all the same features as canals model:
- working flaps
- working spoilers
- working ADI (in the cockpit)
- working doors
- other working control surfaces
- and retractable gear
This Model will come with the following liveries:
- House livery
- Tampa Cargo
- Avianca Cargo
- DHL
- DHL (air transat converted)
- DHL (air greenland converted)
- Egyptair cargo
- air france cargo
Notes: The UV mapping is a bit weird, however it doesn't impact the liveries too much and the aircraft still looks great!
This model will not be locked, so you can use it in your work if you want, please just contact me via gta5mods DM to know what you're up to. That would be very much appreciated
Feel free to upload liveries for it, just mention the model with me as author in the description
This mod might be updated in the future with a mod menu for different engines but i am probably not gonna do that though, unless a lot off people want that
Credits and special thanks to:
- FoxUnitOne, for learning me how to mod and learning me the base features
of Zmodeler
- CanalEmbraer, for granting permission to make a a330-200P2F out of his -200
and
providing me automatically with the model of the -200
- Elope, for testing the mod ingame and making some cool screens of it
I wanna thank you guys so much for letting me get so close to the whole modding experience.
I have some cool projects awaiting ahead so stay tuned for that, mainly the MD90
NOTE: screens will be updated later the comming days
At the February 2012 Singapore Airshow, the A330P2F freighter conversion programme was launched, engineered by ST Aerospace, supported by Airbus, and industrialised and marketed by their Dresden-based Elbe Flugzeugwerke joint venture. Targeting a 2016 introduction, Airbus then estimated a market requirement for 2,700 freighters over 20 years, half of these mid-sized, including 900 conversions.
The A330-300P2F, adapted for express delivery and e-commerce lower densities, can carry up to 62 t (137,000 lb) over 3,650 nmi (6,760 km). Following flight tests in October 2017 and EASA Supplemental Type Certificate awarded in November, the first was delivered to DHL on 1 December.The A330-200P2F can carry 61 t (134,000 lb) over 4,250 nmi (7,870 km). Following June Flight tests and the STC in July, the first was delivered to EgyptAir Cargo on 3 August 2018.
This model is an adjusted version of the Airbus A330-200 mod from CanalEmbraer
I editted a cargo door on the model and putted an cargo interior in it, i also made some minor changes to the rest off the plane. This model features all the same features as canals model:
- working flaps
- working spoilers
- working ADI (in the cockpit)
- working doors
- other working control surfaces
- and retractable gear
This Model will come with the following liveries:
- House livery
- Tampa Cargo
- Avianca Cargo
- DHL
- DHL (air transat converted)
- DHL (air greenland converted)
- Egyptair cargo
- air france cargo
Notes: The UV mapping is a bit weird, however it doesn't impact the liveries too much and the aircraft still looks great!
This model will not be locked, so you can use it in your work if you want, please just contact me via gta5mods DM to know what you're up to. That would be very much appreciated
Feel free to upload liveries for it, just mention the model with me as author in the description
This mod might be updated in the future with a mod menu for different engines but i am probably not gonna do that though, unless a lot off people want that
Credits and special thanks to:
- FoxUnitOne, for learning me how to mod and learning me the base features
of Zmodeler
- CanalEmbraer, for granting permission to make a a330-200P2F out of his -200
and
providing me automatically with the model of the -200
- Elope, for testing the mod ingame and making some cool screens of it
I wanna thank you guys so much for letting me get so close to the whole modding experience.
I have some cool projects awaiting ahead so stay tuned for that, mainly the MD90
NOTE: screens will be updated later the comming days
Πρωτοανέβηκε: 19 Μάιος 2020
Πιο πρόσφατη ενημέρωση: 19 Μάιος 2020
Last Downloaded: πριν 4 μέρες
16 σχόλια
Hey guys here i am with a little side project ive been working on, the A330-200P2F
At the February 2012 Singapore Airshow, the A330P2F freighter conversion programme was launched, engineered by ST Aerospace, supported by Airbus, and industrialised and marketed by their Dresden-based Elbe Flugzeugwerke joint venture. Targeting a 2016 introduction, Airbus then estimated a market requirement for 2,700 freighters over 20 years, half of these mid-sized, including 900 conversions.
The A330-300P2F, adapted for express delivery and e-commerce lower densities, can carry up to 62 t (137,000 lb) over 3,650 nmi (6,760 km). Following flight tests in October 2017 and EASA Supplemental Type Certificate awarded in November, the first was delivered to DHL on 1 December.The A330-200P2F can carry 61 t (134,000 lb) over 4,250 nmi (7,870 km). Following June Flight tests and the STC in July, the first was delivered to EgyptAir Cargo on 3 August 2018.
This model is an adjusted version of the Airbus A330-200 mod from CanalEmbraer
I editted a cargo door on the model and putted an cargo interior in it, i also made some minor changes to the rest off the plane. This model features all the same features as canals model:
- working flaps
- working spoilers
- working ADI (in the cockpit)
- working doors
- other working control surfaces
- and retractable gear
This Model will come with the following liveries:
- House livery
- Tampa Cargo
- Avianca Cargo
- DHL
- DHL (air transat converted)
- DHL (air greenland converted)
- Egyptair cargo
- air france cargo
Notes: The UV mapping is a bit weird, however it doesn't impact the liveries too much and the aircraft still looks great!
This model will not be locked, so you can use it in your work if you want, please just contact me via gta5mods DM to know what you're up to. That would be very much appreciated
Feel free to upload liveries for it, just mention the model with me as author in the description
This mod might be updated in the future with a mod menu for different engines but i am probably not gonna do that though, unless a lot off people want that
Credits and special thanks to:
- FoxUnitOne, for learning me how to mod and learning me the base features
of Zmodeler
- CanalEmbraer, for granting permission to make a a330-200P2F out of his -200
and
providing me automatically with the model of the -200
- Elope, for testing the mod ingame and making some cool screens of it
I wanna thank you guys so much for letting me get so close to the whole modding experience.
I have some cool projects awaiting ahead so stay tuned for that, mainly the MD90
NOTE: screens will be updated later the comming days
At the February 2012 Singapore Airshow, the A330P2F freighter conversion programme was launched, engineered by ST Aerospace, supported by Airbus, and industrialised and marketed by their Dresden-based Elbe Flugzeugwerke joint venture. Targeting a 2016 introduction, Airbus then estimated a market requirement for 2,700 freighters over 20 years, half of these mid-sized, including 900 conversions.
The A330-300P2F, adapted for express delivery and e-commerce lower densities, can carry up to 62 t (137,000 lb) over 3,650 nmi (6,760 km). Following flight tests in October 2017 and EASA Supplemental Type Certificate awarded in November, the first was delivered to DHL on 1 December.The A330-200P2F can carry 61 t (134,000 lb) over 4,250 nmi (7,870 km). Following June Flight tests and the STC in July, the first was delivered to EgyptAir Cargo on 3 August 2018.
This model is an adjusted version of the Airbus A330-200 mod from CanalEmbraer
I editted a cargo door on the model and putted an cargo interior in it, i also made some minor changes to the rest off the plane. This model features all the same features as canals model:
- working flaps
- working spoilers
- working ADI (in the cockpit)
- working doors
- other working control surfaces
- and retractable gear
This Model will come with the following liveries:
- House livery
- Tampa Cargo
- Avianca Cargo
- DHL
- DHL (air transat converted)
- DHL (air greenland converted)
- Egyptair cargo
- air france cargo
Notes: The UV mapping is a bit weird, however it doesn't impact the liveries too much and the aircraft still looks great!
This model will not be locked, so you can use it in your work if you want, please just contact me via gta5mods DM to know what you're up to. That would be very much appreciated
Feel free to upload liveries for it, just mention the model with me as author in the description
This mod might be updated in the future with a mod menu for different engines but i am probably not gonna do that though, unless a lot off people want that
Credits and special thanks to:
- FoxUnitOne, for learning me how to mod and learning me the base features
of Zmodeler
- CanalEmbraer, for granting permission to make a a330-200P2F out of his -200
and
providing me automatically with the model of the -200
- Elope, for testing the mod ingame and making some cool screens of it
I wanna thank you guys so much for letting me get so close to the whole modding experience.
I have some cool projects awaiting ahead so stay tuned for that, mainly the MD90
NOTE: screens will be updated later the comming days
Πρωτοανέβηκε: 19 Μάιος 2020
Πιο πρόσφατη ενημέρωση: 19 Μάιος 2020
Last Downloaded: πριν 4 μέρες
5mods on Discord
This file has been approved automatically. If you think this file should not be here for any reason please report it.
nice...are you going to do any BAE-146 series? am keen to include a couple of those in my qantas fleet :)
@camel69er I hope I'd be able to eventually
very cool...luv your work & very much appreciated
AMAZING
are you make A330 MRTT?
@hhhhh3 I don't think I will sorry
Happen to know where I could get the template if there is one available?
@TheFlyingSc0t you can just export one off the skins in the ytd than you can use that as a template
Another brilliant mod. You're outdoing yourself with every new mod. Thanks for the upload.
great mod hans
@EJA1949 @camel69er @Eison YT @omriber your welcome
Looks good. But the texture's quality looks bad, especially the wheels. It will be better when using Skyline's A333 as original mould.
Wowww, good job! Can I do this for a replace?
gear is just a single scam.
Does the gear tilt?